Tube Bending

Read 37601 times
Published in Manufacturing

Tube bending is a metal forming processes used to permanently form pipes or tubing.  There are several bending procedures that can be used and depending on our customers specific needs.  Most commonly round stock is used in tube bending. However we can also bend square and rectangular tubes and pipes to meet job specifications.

Custom Tube Bending Services

At AH Stock Manufacturing Corp., we offer our customers a solution to all of their manufacturing needs, from engineering to finished products. In addition our Tube bending capabilities allow us to handle up to 2” diameter schedule 40 pipe.  Call us today at 920.726.4211 to speak to one of our friendly and knowledgeable sales professionals.

 

 

Our Manufacturing Capabilities Included:

  • 2 Weidemann Magnum 5000 CNC Punch Presses with material capacity to 3/8" and sizes to 60" x 144".
  • High definition plasma, 52 station turret with auto index and 45 ton capacity.
  • Messer Metal Master High Performance Plasma with a table capacity of 1.25" thick plate and sheet sizes to 96" x 240".
  • 3 Fadal Verticle Machining Centers with capacity to 30" x 60" x 28". • CNC 4 Head Burn Table with 6.00" thick maximum cut
  • Hypertherm Plasma cutting and beveling to 1.00" steel. • 4 Press Brakes with capacity to 12' x 150 tons and CNC controls for precision repeatability
  • 2 Shears with the largest having a capacity of 1/4" steel x 10'.
  • 3 Marvel saws with the largest having a capacity to cut 20" x 24" and 60 degrees in both directions.
  • 20 Wire Welding machines from 300 to 600 amps.
  • 3 Heliarc welding machines
  • 2 Aluminum wire welders.
  • Spotwelding capacity to 1/8" material.
  • Studwelders to 1/2" capacity
  • Welding positioners to 3,000 lbs
  • Metal Rolling capacity of 1/4" x 36.00"
  • Tube Bending capacity up to 2.00" schedule 40 pipe.
  • Manual Punch Presses to 1.062 diameter thru 1/2" H.R.S.
  • Drill Presses to 2.500" hole diameter and 1.25" tapping capacity.
  • Notching and coping capacity to 60 tons.
  • Belt sanding up to 24.00" width and continuous feed.
  • We also have turning and threading equipment and the ability to construct special shipping containers.
  •  

    For over 65 years, A.H. Stock Manufacturing Corp. has been a builder and fabricator of metal products for a variety of industries. We manufacture various components for several OEM manufacturers throughout the United States that are involved in heavy lifting equipment, large tooling centers and fabricating equipment among others. Our mission is to provide our customers with a single source for their metal fabrication needs - from raw materials to finished assemblies - that meet or exceed their expectations.

    A.H. Stock Manufacturing Corp. | 8402 Center Road Newton, WI 53063 | Phone: (920) 726-4211 | Fax: (920) 726-4214 | Email:sales@ahstockmfg.com

    Website Design by Strategic Strategies Inc.