Mild Steel 1020 Plunger-Style Dump Valve with 20" Long Handle

This mild steel construction manually operated dump valve has square flange and the controls have been slightly moved from our standard position.  This manually operated Dump Valve comes with a 20" long handle.  To order this valve, please contact our sales department at 920.726.4211 or email This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Mild Steel 1065-16EXH Gate-Style Dump Valve

This 1065 gate-style dump valve, also referred to as a 1065 flip-up dump valve, is manually operated.  This 1065-16EXH Dump Valve is constructed of mild steel and is 16" in total length and has a right handed manualy operated valve on it.  This dump valve also comes with an extension handle.  To order this valve, please contact our sales department at 920.726.4211 or email This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

 

Mild Steel 1060 Gate-Style Dump Valve

This mild steel construction manually operated, left handed dump valve has had the controls for the valve slightly moved from our standard position. The pivot point is 10.0". The clearance for this dump valve is 7.0". The overall length of the dump valve is 20" long. This valve also comes with an extended handle on it to ease the operation of it. To order this valve, please contact our sales department at 920.726.4211 or email This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

 

Mild Steel 1065 Gate-Style Dump Valve

This mild steel construction manually operated, right handed dump valve has square flange and the controls have been slightly moved from our standard position. The pivot point is 10.0". The clearance for this dump valve is 7.0". The overall length of the dump valve is 16" long.  To order this valve, please contact our sales department at 920.726.4211 or email This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

 

Mild Steel 1015 Custom Newton Kwik Dump Valve  Gate-Style Dump Valve

This mild steel custom construction 1015 Newton Kwik Dump Valve was constructed with the following measurements A=12.5, B=7.5, C=16  and has a top handle manual control for manual operation.  To order this valve, please contact our sales department at 920.726.4211 or email This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

 

Mild Steel 1065 Gate-Style Dump Valve

This mild steel construction manually operated, 1065 dump valve has square flange and MUST be used on a 3/8" or thinner tank wall. The dump valve is manually operated the controls are right handed. The clearance for this dump valve is 7.0". The overall length of the dump valve is 20" long. This valve also comes with a lock-open device. PLEASE NOTE, THIS DUMP VALVE IS FOR USE WITH A STEEL TANK ONLY.  To order this valve, please contact our sales department at 920.726.4211 or email This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

 

Mild Steel 1065 Gate-Style Dump Valve

Our 1030 plunger-style dump valve, also referred to as a 1030 newton kwik dump valve, is electrically operated.  The actuator for the 1030 plunger style dump valve are mounted on the top.  Also included with the 1030 electric operated dump valve is an attached back-up, two position handle.  This particular electrically operated Dump Valve is 22" long and comes with our 4036, a 36" telescoping chute.  To order this valve, please contact our sales department at 920.726.4211 or email This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

 

Mild Steel 1070-22 Gate-Style Dump Valve

Our 1070 series Kwik Dump Valves are electric actuated top mount and angles flange dump valves.  This particular dump valve also comes with our 4036, electric operated 36" telescoping cute and is 22" long.  To order this valve, please contact our sales department at 920.726.4211 or email This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

 

Mild Steel 1080-54-26 Gate-Style Dump Valve

Our 1080 series Kwik Dump Valves are electric actuated left side mount and angles flange dump valves.  This particular dump valve also comes with a cute, is finished painted and is 26" long.  To order this valve, please contact our sales department at 920.726.4211 or email This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

 

For over 65 years, A.H. Stock Manufacturing Corp. has been a builder and fabricator of metal products for a variety of industries. We manufacture various components for several OEM manufacturers throughout the United States that are involved in heavy lifting equipment, large tooling centers and fabricating equipment among others. Our mission is to provide our customers with a single source for their metal fabrication needs - from raw materials to finished assemblies - that meet or exceed their expectations.

A.H. Stock Manufacturing Corp. | 8402 Center Road Newton, WI 53063 | Phone: (920) 726-4211 | Fax: (920) 726-4214 | Email:sales@ahstockmfg.com

Website Design by Strategic Strategies Inc.