More in this category: « Shearing Painting »
Social sharing

Sawing

Read 30844 times
Published in Manufacturing
Sawing

Sawing is a process that is used to cut raw material into the desired size.  At AH Stock Manufacturing, we have a state of the art Marvel bandsaws that allow us to have the capacity to cut 20” x 24” and 60 degrees in both directions.

Custom Sawing Services

At AH Stock Manufacturing Corp., we offer our customers a solution to all of their manufacturing needs, from engineering to finished products. In addition our saws have the ability for mitering in both directions and a standard 3˚ canted column for maximum versatility and high production cutting. Our bandsaws combine an electric blade drive with sensor less vector control, full stroke hydraulic vising, and a 24" index table with electronic measuring for increased accuracy and minimal cycle times.

Our Manufacturing Capabilities Included:

  • 2 Weidemann Magnum 5000 CNC Punch Presses with material capacity to 3/8" and sizes to 60" x 144".
  • High definition plasma, 52 station turret with auto index and 45 ton capacity.
  • Messer Metal Master High Performance Plasma with a table capacity of 1.25" thick plate and sheet sizes to 96" x 240".
  • 3 Fadal Verticle Machining Centers with capacity to 30" x 60" x 28". • CNC 4 Head Burn Table with 6.00" thick maximum cut
  • Hypertherm Plasma cutting and beveling to 1.00" steel. • 4 Press Brakes with capacity to 12' x 150 tons and CNC controls for precision repeatability
  • 2 Shears with the largest having a capacity of 1/4" steel x 10'.
  • 3 Marvel saws with the largest having a capacity to cut 20" x 24" and 60 degrees in both directions.
  • 20 Wire Welding machines from 300 to 600 amps.
  • 3 Heliarc welding machines
  • 2 Aluminum wire welders.
  • Spotwelding capacity to 1/8" material.
  • Studwelders to 1/2" capacity
  • Welding positioners to 3,000 lbs
  • Metal Rolling capacity of 1/4" x 36.00"
  • Tube Bending capacity up to 2.00" schedule 40 pipe.
  • Manual Punch Presses to 1.062 diameter thru 1/2" H.R.S.
  • Drill Presses to 2.500" hole diameter and 1.25" tapping capacity.
  • Notching and coping capacity to 60 tons.
  • Belt sanding up to 24.00" width and continuous feed.
  • We also have turning and threading equipment and the ability to construct special shipping containers.

    •  

    Rate this item
    (1 Vote)
    back to top

    For over 65 years, A.H. Stock Manufacturing Corp. has been a builder and fabricator of metal products for a variety of industries. We manufacture various components for several OEM manufacturers throughout the United States that are involved in heavy lifting equipment, large tooling centers and fabricating equipment among others. Our mission is to provide our customers with a single source for their metal fabrication needs - from raw materials to finished assemblies - that meet or exceed their expectations.

    A.H. Stock Manufacturing Corp. | 8402 Center Road Newton, WI 53063 | Phone: (920) 726-4211 | Fax: (920) 726-4214 | Email:sales@ahstockmfg.com

    Website Design by Strategic Strategies Inc.