Laser Cutting

Read 13883 times
Published in Manufacturing

Laser cutting is a technology that uses a high power laser to cut materials in industrial manufacturing applications.  Laser cutting works by directing the output of a high-power laser via a computer, at the material to be cut. The material is then melted, burned, vaporized away, or is blown away by a jet of gas, leaving an edge with a high-quality surface finish. Our Industrial laser cutters are used to cut flat-sheet material as well as structural and piping materials.

Custom Laser Cutting Services

At AH Stock Manufacturing Corp., we offer our customers a solution to all of their manufacturing needs, from engineering to finished products. In addition our Mitsubishi LVP3015 laser cutter is the latest in laser cutting technology giving us a 4000 watt laser capacity complete with 64 bit CNC Controls.    Call us today at 920.726.4211 to speak to one of our friendly and knowledgeable sales professionals.

 

Our Manufacturing Capabilities Included:

  • 2 Weidemann Magnum 5000 CNC Punch Presses with material capacity to 3/8" and sizes to 60" x 144".
  • High definition plasma, 52 station turret with auto index and 45 ton capacity.
  • Messer Metal Master High Performance Plasma with a table capacity of 1.25" thick plate and sheet sizes to 96" x 240".
  • 3 Fadal Verticle Machining Centers with capacity to 30" x 60" x 28". • CNC 4 Head Burn Table with 6.00" thick maximum cut
  • Hypertherm Plasma cutting and beveling to 1.00" steel. • 4 Press Brakes with capacity to 12' x 150 tons and CNC controls for precision repeatability
  • 2 Shears with the largest having a capacity of 1/4" steel x 10'.
  • 3 Marvel saws with the largest having a capacity to cut 20" x 24" and 60 degrees in both directions.
  • 20 Wire Welding machines from 300 to 600 amps.
  • 3 Heliarc welding machines
  • 2 Aluminum wire welders.
  • Spotwelding capacity to 1/8" material.
  • Studwelders to 1/2" capacity
  • Welding positioners to 3,000 lbs
  • Metal Rolling capacity of 1/4" x 36.00"
  • Tube Bending capacity up to 2.00" schedule 40 pipe.
  • Manual Punch Presses to 1.062 diameter thru 1/2" H.R.S.
  • Drill Presses to 2.500" hole diameter and 1.25" tapping capacity.
  • Notching and coping capacity to 60 tons.
  • Belt sanding up to 24.00" width and continuous feed.
  • We also have turning and threading equipment and the ability to construct special shipping containers.
  •  

    Rate this item
    (1 Vote)
    back to top