Item | Qty | Description | Part Number |
1 | 1 | Chute Weldment | 1020W |
2 | 1 | Seal | 101008 |
3 | 1 | Backing Plate | 101010 |
4 | 1 | Support Plate | 101009 |
5 | 1 | Brass Shaft | 101011P |
6 | 1 | Internal Tooth Lockwasher |
3744-3780 |
7 | 1 | 3/4-10 Nut (Stainless Steel) |
3733-3782 |
8 | 1 | 1.00” Pillow Block Bearing | 1503-0001W |
9 | 4 | 3/8-16 x 3/4” Bolt | 3601-1030 |
10 | 4 | 3/8” Lockwasher | 3643-1255 |
11 | 4 | 3/8-16 Nut | 3633-1260 |
12 | 1 | 3/8-16 x 1.50” Bolt | 3601-1070 |
13 | 1 | 3/8-16 Nylon Locknut | 3636-1250 |
14 | 1 | Handle Grip | 101028 |
15 | 1 | Gasket | 101029B |
16 | 4 | Bolt Strip | 101027-2.00 |
17 | 1 | 3/4" Pillow Block Bearing |
1503-002W |
18 | 1 | Lock | 105013 |
19 | 2 | Spindle Assembly | 3501-0018 |
20 | 1 | Neoprene Cap | 3501-0019 |
Lubrication Notes
All moving parts require periodic lubrication. Valve must work freely by loosening and lubrication all moving parts shown in diagram. Item 5 & 8 Bronze Bushing and brass Link must slide free (No Friction) & lubricate. Item 12 &13 Bolts and Nylon locknuts have to be loose. Pivot Pin needs lubrication and must work freely. (We recommend quality aerosol white lithium grease for lubrication)